Champ5 Brushcutter Head

The CHAMP 5 is a replacement head for straight shaft brushcutters. These machines are fitted with a gearbox at the end of the drive shaft and rotate anti-clockwise when cutting. The CHAMP 5 will adapt to ALL straight shaft brushcutters that accept a blade. The CHAMP 5 mounts on the same 25mm riser as the blade.

Highly engineered from marine grade aluminium The CHAMP 5 is designed for robust Australian conditions. There are no moving parts in the CHAMP 5 and special care has been taken with the engineering of the cutting cylinder to ensure there are no sharp edges bearing on the cutting line.

Using fixed length line the CHAMP 5 is usually loaded with three lines making six cutters. The large number of lines means that wear is spread evenly over more cutting line which in turn makes for extended non-stop cutting time. The CHAMP 5 commonly achieves up to two hours or more before line needs to be replaced.
Line replacement and release is easily done without having to remove the head from the machine. The CHAMP 5 is provided with eight C spanner slots - a C Spanner is included with each Head sold.